TURBO PMAC PC
TURBO PMAC VME
-
TURBO PMAC-PC (ANALOG)
-
TURBO PMAC2-PC (DIGITAL)
-
TURBO PMAC2-PC ULTRA LITE (MACRO)
-
TURBO PMAC-VME (ANALOG)
-
TURBO PMAC2-VME (DIGITAL)
-
TURBO PMAC2-VME ULTRA LITE (MACRO)
Turbo PMAC is built on the
same foundations as the PMAC 1 series only with a lot more axes,
variables, memory space, DP Ram and a lot more horsepower.
Basically, a lot more of everything! Check out the differences
between the two PMAC series.
| Feature | PMAC | Turbo PMAC |
| Max. # of Axes | 8 | 32 |
| Max. # of Servo Channels | 16 | 40 |
| Number of I-Variables | 1024 | 8192 |
| Number of M-Variables | 1024 | 8192 |
| Number of P-Variables | 1024 | 8192 |
| Number of Q-Variables | 1024 | 8192 |
| Commutation Sine Table Size | 256 | 2048 |
| CPU Frequencies (MHz) | 20, 40, 60, 80 | 60, 80, 100 |
| Instructions per Clock Cycle | 0.5 | 0.75 |
| Firmware Memory Capacity | 32k x 24 | 64k x 24 |
| Compiled PLC Memory Capacity | 15k x 24 | 48k x 24, 432k x 24 |
| User Buffer Memory Capacity | 32k x 24 | 128k x 24, 512k x 24 |
| DPRAM Capacity | 8k x 16 | 8k x 16, 16k x 16 |
| Multiple-Block Lookahead for Acceleration Control? | No | Yes |
| Simultaneous Use of Multiple Communications Ports? | No | Yes |
For more detailed information go to www.Deltatau.com
PMAC programming made easy!