|
2 Axis Motion Controller |
|
40MHZ DSP563XX CPU 128k x 24 internal zero-wait-state SRAM 512k 8 Flash Memory for firmware and user backup |
| 2 channels axis interface circuitry, each including: 16-bit +/- 10V analog output, 3 Channel (AB quad with index) differential / single ended/ encoder inputs |
| 4 input flags, 2 output flags |
| Display, muxed I/O, direct I/O interface ports |
| RS232 Serial interface Communications 33 MHz PCI bus interface |
| Interface to 4 external 16-bit serial ADC's |
| Buffered expansion port |
| Clock crystal with +/- 100 ppm accuracy |
| PID/notch/feed forward servo algorithms |
| 1-year warranty from date of shipment |
| One CD-ROM per set of 1 to 4 PMAC's in shipment (Cables, mounting plates, mating connectors not included) |
|
4 Axis Motion Controller |
| 40MHZ DSP563XX CPU 128k x 24 internal zero-wait-state SRAM 512k 8 Flash Memory for firmware and user backup |
| Four channels axis interface circuitry, each including: 16-bit +/- 10V analog output, 3 Channel (AB quad with index) differential / single ended/ encoder inputs |
| 4 input flags, two output flags input to external 16-bit serial ADC |
| Display, muxed I/O, direct I/O interface ports |
| Buffered expansion port |
| Clock crystal with +/- 100 ppm accuracy |
| PID/notch/feed forward servo algorithms |
| 1-year warranty from date of shipment |
| Latest release firmware version |
| One CD-ROM per set of 1 to 4 PMAC's in shipment (Cables, mounting plates, mating connectors not included) |
|
Options |
| Firmware version specifications |
| 60 & 80 MHZ CPU DSP563xx |
| On-board Dual Port Ram |
| 2 -channel Voltage To Frequency Converter |
|
8 Axis Motion Controller |
| 40MHZ DSP563XX CPU 128k x 24 internal zero-wait-state SRAM 512k 8 Flash Memory for firmware and user backup |
| Four channels axis interface circuitry, each including: 16-bit +/- 10V analog output, 3 Channel (AB quad with index) differential / single ended/ encoder inputs |
| 4 input flags, two output flags input to external 16-bit serial ADC |
| Display, muxed I/O, direct I/O interface ports |
| Buffered expansion port |
| Clock crystal with +/- 100 ppm accuracy |
| PID/notch/feed forward servo algorithms |
| 1-year warranty from date of shipment |
| Latest release firmware version |
| One CD-ROM per set of 1 to 4 PMAC's in shipment (Cables, mounting plates, mating connectors not included) |
|
Options |
| Firmware version specifications |
| 60 & 80 MHZ CPU DSP563xx |
| On-board Dual Port Ram |
| 2 -channel Voltage To Frequency Converter |
|
8 Axis Motion Controller |
| 20MHZ DSP56002 CPU 128k x 24 internal one-wait-state battery-backed SRAM 2kx 8 EEPROM memory for setup and variable backup |
| Four channels axis interface circuitry, each including: 16-bit +/- 10V analog output, 3 Channel (AB quad with index) differential / single ended/ encoder inputs |
| 4 input flags, two output flags input to external 16-bit serial ADC |
| Display, control panel, muxed I/O, direct I/O interface ports |
| Buffered expansion port |
| Clock crystal with +/- 100 ppm accuracy |
| PID/notch/feed forward servo algorithms |
| 1-year warranty from date of shipment |
| Latest release firmware version |
| One CD-ROM per set of 1 to 4 PMAC's in shipment (Cables, mounting plates, mating connectors not included) |
|
Options |
| Flash Memory |
| 40 & 60 & 80 & 160 MHZ CPU Motorola 56002 |
| On-board Dual Port Ram |
| Voltage To Frequency Converter |
For more detailed information go to www.Deltatau.com
PMAC programming made easy!